- A+
Introduction
MFC2710 printer is a compact and efficient multi-functional digital black and white printer designed for small businesses and home offices. It comes with a toner cartridge that needs to be replaced when it runs out of toner. When replacing the toner, MFC2710 printer requires resetting to clear the toner low or toner empty error message. This article will guide you through the process of resetting the printer after replacing the toner.
Step 1: Open the printer cover
Firstly, open the printer cover. Locate the open button on the front of the printer, and press it to open the printer cover. This will reveal the toner cartridge assembly.
Step 2: Remove the old toner cartridge
After opening the printer cover, gently pull the old toner cartridge out of the printer. Make sure to dispose of it properly and not to touch the drum or the roller with your hands, as it may result in poor print quality.
Step 3: Prepare the new toner cartridge
Before installing the new toner cartridge, give it a gentle shake to distribute toner evenly inside the cartridge. Then, remove the protective cover from the new cartridge.
Step 4: Install the new toner cartridge
Next, insert the new toner cartridge into the printer, aligning it with the guides and pushing it firmly into place until it clicks into position. Ensure that the cartridge is securely seated in the printer and the front cover of the printer is properly closed.
Step 5: Reset the printer
After the new toner cartridge is installed, it is important to reset the printer to clear the toner low or toner empty error message. Here are the steps to reset the printer:
Press the power button to turn on the printer.
Press the “Menu” button on the control panel of the printer until you see “Machine Info” on the display.
Press the “OK” button on the control panel.
Press the “Menu” button until you see “Reset Parts Life” on the display.
Press the “OK” button on the control panel.
Choose the toner cartridge that you just replaced and press the “OK” button.
Press the “1” button to reset the toner life of the printer.
Press the “Stop/Exit” button to exit the menu.
After following these steps, the printer will be reset, and the toner low or toner empty error message will be cleared. The printer is now ready to use.
Conclusion
Replacing the toner cartridge of MFC2710 printer is a straightforward process. To ensure the smooth operation of the printer, it is essential to reset the printer after replacing the toner. By following the steps outlined in this article, you can easily reset the printer and clear any toner low or toner empty error messages. Always use genuine toner cartridges and dispose of the old cartridges properly to keep the environment safe.
